Common operating status of CNC engraving machine

The common operating states of CNC engraving machines mainly include idle state lock state, lock state, tight stop state, running state, and pause state.

1, idle state

This is the most common state in which the machine does not currently have an action output and is ready to accept new tasks and start new actions.

2, locked state

The lock state is an internal state that generally indicates when the state is now switched. So under normal circumstances, users can't reach it.

3, the state of the stop

This is an abnormal state. When the machine has a hardware failure or the user presses the "Stop" button, the system enters this state and performs the specified protection actions, such as turning off the spindle motor, cooling pump, etc. In this state, the machine is also locked and cannot execute any New action. After the user has eliminated the hardware failure or released the emergency stop switch, the system automatically performs a "reset" operation to restore the machine to the "idle" state.

4, running status

When the machine is performing an action, the system enters the running state.

5, suspended state

When the machine is moving, if the user executes the "Operation | Pause" command, or the system resolves to M01 (waiting for the command), the system enters the pause state and waits for the user to further input. The user can continue execution by executing the "Operation|Start" command, or execute the "Stop" or "Reset" instruction to abort the current operation and put the system into the "Idle" state.

Woodworking machine purchase

 When purchasing woodworking engraving machines, users should pay attention to the difference between advertising engraving machine and stone engraving machine, and pay attention to the following points:
    1, the power of the engraving machine
    Due to the relatively high hardness of wood, woodworking engraving machines generally need to be equipped with a larger spindle motor than the advertising engraving machine, so that the phenomenon of the Mavericks pulling the cart will not occur, which will affect the work efficiency.
    2, vacuum device
    Woodworking engraving machines generate a lot of dust during work, and the engraving machine should be designed with a good vacuuming device.
    3. Adsorption fixed table
    The engraving speed of the woodworking engraving machine is very fast and the force is very large. The fixing method of the ordinary jig is difficult to fix, so the woodworking engraving machine should be equipped with a vacuum adsorption platform to fix the engraving material.
    4, before the purchase test
    Any customer who purchases an engraving machine should visit the manufacturer for a field visit. It is best to try the sculpture on site to observe the performance of the machine. Nowadays, the quality of the engraving machine brand on the market is also uneven. It is recommended to buy the reliable machine for the buyer to buy the common on-site inspection and try the sculpture.