What are the precautions for loading and unloading the advertising engraving machine?

1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.

2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.

3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.

4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise it will easily generate vibration during the machining process, which will affect the processing quality of the workpiece surface.

5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.

6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.

7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first screw it in place with no effort.

8. When unloading the knife, use an air gun to clean the dust on the pressure cap and the rotor shaft before unloading the knife.

Advertising engraving machine head maintenance?

1. Clean up the dirt in time.

2, regular inspection, worn Hu will replace the advertising engraving machine cutter head.

3. Use the corresponding head to cut.